Video Transmitter & Colour Pinhole CCTV
Video Camera * High-Sensitivity High Signal:Noise Ratio Colour Pinhole CCD
Camera with Wireless 4 Channel 2.4 GHz Video Sender Transmitter & Micro Antenna
* Ideal for portable, discreet, covert applications and for Multiple Monitoring
/ Observation / Recording locations * Compact 12 VOLT DC Colour CCTV Video
Camera & 2.4 GHz VIDEO SENDER / TRANSMITTER with Micro Antenna * Range in ideal
clear line-of-sight conditions up to 600 metres with High 18 dBi Gain Antenna
|
|
Cat Code: TX-CAM2P
Discontinued
click
here for
similar product
|
Contact us |
High-Sensitivity High
Signal-to-Noise Ratio Wireless 2.4 GHz Colour Video Camera with 5 mm Pinhole
Lens * 4 Channel 2.4 GHz Video Transmitter with Micro Antenna
|
High Sensitivity
* High Signal:Noise Ratio
Compact 2.4 GHz 4 Channel Wireless Colour PINHOLE CCTV Video Camera with
inbuilt Video Transmitter and Micro Antenna.
Ideal for portable
& discreet / covert applications or virtually unlimited Monitoring /
Observation / Recording locations using multiple Receivers.
Cat Code:
REG12/0.6A Regulated Plug Pack
(Net) $20
Cat Code:
BRKT-1I Aluminium Swivel Mounting Bracket $8
CAMERA Image
Sensor 1/4 inch LOW BLEMISH CCD, 512 x 582 pixels. PAL TV System.
Sensitivity: ~ 3 lux @ F1.2 (this value is provided for comparative
purposes only). Signal : Noise Ratio ~ 48 dB.
Resolution: ~ 440
Horizontal Lines (this value is provided for comparative purposes only).
Automatic
Electronic Shutter: 1/50 ~ 1/100 000 second, 20 ms ~ 10 microseconds.
Standard 1/4 inch UNC female thread Top & Bottom for Mounting Bracket.
Accessory Lenses:
None.
Power Requirements:
12 Volts DC well filtered and Regulated, ~ 160 mA, via 2.1 x 5.5 mm
socket, Center Pin = (+). Dimensions: ~ 55 mm (L), ~ 32 (W), ~ 29 mm (H),
excluding antenna. Antenna ~ 62 mm long, ~ 6 mm diameter. Total weight ~
60 grams.
VIDEO
TRANSMITTER 4 Channel (Australia 2 Ch) with 'Micro' antenna. Output:
2.4 ~ 2.483 GHz, 10 mW EIRP with Micro Antenna, SMB connector.
Pictured with Micro
Plug-In Antenna (supplied)
Connection info
here
|
|
@ 3
metres |
@ 5
metres |
@ 9
metres |
@ 15
metres |
Width of Vision
with 5 mm Lens |
2.2
metres |
3.6
metres |
6.5
metres |
10.8
metres |
Additional Lens
selection info
here |
|
|
|
|
Manufacturer's
Experience: 10 + Years ISO 9001 Certified, made in Taiwan.
Camera is completely
"Self-Contained" no other components required, simply connect to Power Supply &
Video source.
Compatibility:
Transmissions may be received with:
RX-COMPACT 2.4 GHz AV Receiver
RX-Box Wireless Stereo AV Receiver with Omni Directional Antenna
RX-TFT-56 2.4 GHz AV Receiver & 5" Colour TFT LCD Monitor
USES
Wireless Video RF
Transmission link for covert spy and Cable-Free Wireless CCTV Video Surveillance
Cameras, Quad Screen Processors, Switchers, Monitors, Multiplexers, Video
Recorders, Digital PC Recording.
Portable Wireless Video
Transmitter for covert pinhole video camera surveillance in Shops - Showrooms -
Exhibitions - Work Places - Casinos - Theatres - Concerts - Nightclubs - Outdoor
Events - Cinemas - etc. Portable Home Video Surveillance to monitor Swimming
Pools - Caravans - Boats - etc.
Observation of Horses -
Show Animals - Livestock - etc during transportation in Floats - Trucks - etc.
Automobile Rear Vision
and general observation Video Systems for Caravans - Large Boats - Semi Trailers
- Road Trains - Aircraft - Buses - Modern or Historic choo.. choo..
Trains - etc.
Wireless link for VCRs,
PCs, Lightweight Compact Video Cameras for shooting video program material,
Remote Control: Cars - Boats - Hovercraft - Aircraft, etc.
In Australia Video
Transmitters may be legally used without a licence within the *LIPD 2400 ~ 2463
MHz Band and 10 mW *EIRP limit.
RANGE
Depends on surroundings,
obstructions, buildings, antenna gain, other transmitters, EMI & RFI in the
vicinity.
In ideal, clear,
Line-of-Sight conditions with Vertical 3 dBi Whip antenna on TX
Vertical 3 dBi Whip
antenna on Receiver up to ~ 100 metres.
Correctly matched and
aligned 18 dBi antenna on Receiver up to ~ 600 metres.
Due to the nature of
Radio Signals results are unpredictable (in the same manner as Mobile / Cellular
Telephones) signals reflected from surrounding objects arriving at Receiver
antenna may Add-to or Subtract-from the direct signal from Transmitter.
Directional antennas may reduce affect of reflected signals.
RECEIVER ANTENNAS
Range and Signal to Noise
Ratio (SNR) may be improved by increasing gain of antenna on Receiver and/or
Transmitter (in Australia TX may only be fitted with 3 dBi antenna). For
maximum signal transfer TX and RX antennas should be the same polarity, that is
both oriented Vertically or Horizontally.
 |
Cat Code:
Ant-Stub
(Net) $30
0 dBi gain, ~ 50
ohms impedance.
Length: ~ 52 mm.
Diameter: ~ 9 mm. Weight: ~ 6 grams.
Pictured fitted to
TX-CAM 3.
SMA male
Connector.
|
 |
Cat Code: Ant-Whip
(Gold)
(A) $12
/ (B) $15
Cat Code: Ant-Whip/BP
Bulk Pak 30 pieces (Net) $120
~ 3 dBi gain, ~ 50 ohms
impedance.
Length: ~ 107 mm straight ~ 87
mm folded. Diameter: ~ 9 mm. Weight: ~ 11 grams.
SMA male Connector.
|
 |
Cat Code: Ant-W5dB
(Gold)
(A) $24
/ (B) $30
~ 5 dBi gain, ~ 50 ohms
impedance.
Length: ~ 195 mm straight
~ 170 mm folded. Diameter: ~ 13 mm @ Base ~ 6 mm @ Top. Weight: ~
30 grams.
SMA male Connector.
|
 |
Cat Code: Ant-W9dB
(Gold)
(A) $103 / (B) $129
~ 9 dBi gain, ~ 50 ohms
impedance.
Length: ~ 610 mm ~ 825 mm
with Base Mount Tube. Diameter: ~ 42 mm @ Base ~ 22 mm main center
section ~ 24 mm top cap. Weight: ~ 470 grams ~ 730 grams with Mounting
Tube & Clamps/Brackets.
Supplied with Base Mount Tube and
Clamps/Brackets for surface or Tubular Mast mounting. N female
Connector. <Adaptors &
Extension Cables>
|
 |
Cat Code: Ant-W12dB
(Gold)
(A) $127
/ (B) $159
~ 12 dBi gain, ~ 50 ohms
impedance.
Length: ~ 1210 mm ~ 1425 mm with
Base Mount Tube. Diameter: ~ 42 mm @ Base ~ 22 mm main center section ~ 24
mm top cap. Weight: ~ 670 grams ~ 930 grams with Mounting Tube &
Clamps/Brackets.
Supplied with Base Mount Tube
and Clamps/Brackets for surface or Tubular Mast mounting. N female
Connector. <Adaptors & Extension Cables>
|
 |
Cat Code:
Ant-Y8 (Gold)
(A) $71
/ (B) $89
~ 8 dBi gain, 6 Element. Dimensions (excluding Clamps) ~ 290 x 95 x 35 mm,
~ 530 grams.
Cat Code:
Ant-Y12 (Gold)
(A) $95
/ (B) $119
~ 12 dBi gain, 10 Element. Dimensions (excluding Clamps) ~ 430 x 95 x
35 mm, ~ 600 grams.
Cat Code:
Ant-Y15 (Gold)
(A) $103
/ (B) $129
~ 15 dBi gain, 15 Element. Dimensions (excluding Clamps) ~ 650 x 95 x
35 mm, ~ 680 grams.
Common
Specifications: 2.4 ~ 2.5 GHz, Dipole ~ 50 ohms impedance, ~ 500 mm
RG-142 Coax cable. Supplied with ~ 140 x 70 mm Aluminium mounting plate,
Clamps, etc. Pictured in Vertical Polarity orientation * Mast not
included. SMA male Connector.
|
 |
Cat Code:
Ant-F8N
(Gold)
(A) $63
/ (B) $79
COMPACT Flat Antenna 2.3 ~ 2.5 GHz, ~ 8 dBi gain, ~ 50 ohm impedance.
Beamwidth: ~ 60º (H) ~ 70º (V).
Supplied with
versatile selection of mounting hardware for Wall/Ceiling mounting &
Tubular Mast Clamp. Dimensions (excludes Socket & Brackets) ~ 95 (W) ~ 110
(H) ~ 30 mm (D), ~ 260 grams.
Pictured in Vertical Polarity orientation.
N female Connector. <Adaptors & Extension
Cables>
|
 |
Cat Code:
Ant-P10
(Gold)
(A) $87
/ (B) $109
COMPACT
Semi-Parabolic 2.3 ~ 2.5 GHz, ~ 10.5 dBi gain, ~ 50 ohm impedance.
Beamwidth: ~ 30º (H) ~ 60º (V).
Supplied with
Tubular Mast Clamp. Dimensions (excludes Socket & Brackets) ~ 275 (W) ~ 90
(H) x ~ 58 mm (D), ~ 235 grams.
Pictured in
Vertical Polarity orientation.
SMA female
Connector. <Adaptors & Extension Cables>
|
 |
Cat Code:
Ant-F12
(Gold)
(A) $95
/ (B) $119
COMPACT Flat
Antenna 2.3 ~ 2.5 GHz, ~ 12 dBi gain, ~ 50 ohm impedance. Beamwidth: ~ 28º
(H) ~ 70º (V).
Supplied with
versatile selection of mounting hardware for Wall/Ceiling mounting & two
Tubular Mast Clamps.
Dimensions
(excludes Socket & Brackets) ~ 95 (W) ~ 212 (H) ~ 30 mm (D), ~ 500 grams.
(Shipping weight 1010 grams)
Pictured in
Vertical Polarity orientation.
N female
Connector. <Adaptors & Extension Cables>
|
 |
Cat Code:
Ant-F16
(Gold)
(A) $127
/ (B) $159
COMPACT Flat
Antenna 2.3 ~ 2.5 GHz, ~ 16 dBi gain, ~ 50 ohm impedance.
Beamwidth: ~ 27º
(H) ~ 60º (V).
Supplied with
versatile selection of mounting hardware for Wall/Ceiling mounting & two
Tubular Mast Clamps.
Dimensions
(excludes Socket & Brackets) ~ 135 (W) ~ 455 (H) ~ 30 mm (D), ~ 740 grams.
Pictured in
Vertical Polarity orientation
N female Connector.
<Adaptors & Extension Cables>
|
 |
Cat Code: Ant-F18
(Gold)
(A) $167
/ (B) $209
COMPACT Flat Antenna 2.3 ~ 2.5
GHz, ~ 18 dBi gain, ~ 50 ohm impedance. Beamwidth: ~ 45º (H) ~ 75º (V).
Supplied with versatile
selection of mounting hardware for Wall/Ceiling mounting & two Tubular
Mast Clamps.
Dimensions (excludes Socket &
Brackets) ~ 262 (W) ~ 262 (H) ~ 38 mm (D), ~ 950 grams.
Pictured in Vertical Polarity
orientation.
N female Connector.
<Adaptors & Extension Cables>
|
 |
Cat Code: Ant-P18G
(A) $95
/ (B) $119
2.4 ~ 2.5 GHz, ~ 18 dBi gain
sectional Grid Parabolic, ~ 50 ohm impedance Dipole. Beamwidth ~ 25º in
vertical polarity mode, Front to Back ratio ~ 20 dB. Fitted with ~ 750 mm
RG-8/U Coax cable.
Reflector ~ 390 x ~ 545 mm.
Weight ~ 1.7 kilograms. Supplied with Hor/Vert Clamp mounting hardware.
Carriage in an Air Satchel $13,
via Post $35.
Pictured in Vertical Polarity
orientation * Mast not included. Gold Irridite coated version pictured, we
now stock a more durable Galvanised version only.
N male Connector.
<Adaptors & Extension Cables>
|
 |
Cat Code: SMAm-Nf
(Net) $10
SMA male to N female. Suitable for P18G antenna. |
 |
Cat Code: SMAm-Nm
(Net) $10
SMA male to N male. Suitable for
F8N, W9dB, F12, W12dB, F16 & F18 antennas.
|
 |
Cat Code: SMAm-m
(Net) $10
SMA male to SMA male. Suitable
for P10 antenna.
|
 |
Cat Code:
Cable-178/30 (Gold)
(A) $24
/ (B) $30
30 cm RG-178 Coax
cable with SMA male & female connectors.
Cat Code:
Cable-316/50 (Net) $35
50 cm RG-316 Coax
cable with SMA male & female connectors.
Attenuation ~ 1 dB
@ 3 GHz.
|
 |
Cat Code:
Coax178/SMA (Net) $10
~ 10 cm RG-178 Coax
cable with SMA male connector.
|
 |
Cat Code:
Cable-223/450 (Gold)
(A) $63
/ (B) $79
~ 450 cm Coax Cable
with SMA male & female connectors. Attenuation ~ 0.75 dB/metre @ 2 GHz.
Cat Code:
Cable-223/450N (Gold)
(A) $63
/ (B) $79
not pictured
~ 450 cm Coax Cable
with SMA & N male connectors. Attenuation ~ 0.55 dB/metre @ 3 GHz.
Suitable for F8N, W9dB, F12, W12dB, F16 & F18 antennas.
|
|
Parabolic Yagi &
Flat are directional antennas. Whip antennas when used vertically
are for most practical purposes omni or non directional.
To maximise
'Range' minimise the length of Coax Cable between Antenna and TX/RX.
|
|
Antenna Gain...
what does it mean ??? a simplified explanation
Received signal
strength from an antenna with 3 dBi gain will be double that from an antenna
that has 0 dBi gain, received signal strength from a 6 dBi will be double
that from a 3 dBi and so on... An increase in antenna gain of 3 dBi is
approximately equal to doubling the transmitter output, received signal
strength or range can be increased by raising antenna gain or transmitter
output. Range can be doubled by either increasing antenna gain by 6 dBi or
quadrupling the transmitter output.
The maximum allowed
2.4 GHz LIPD Video Transmitter output power is 10 milliwatts (mW) EIRP (in
Australia), increasing transmitter output is illegal and therefore not an
option.
Increasing the gain
of the receiver antenna is an alternative to increasing transmitter output.
In very simple terms: increasing antenna gain from 0 dBi to 3
dBi is equivalent to raising the output power of a 10 mW transmitter to ~ 20
mW. (5 dBi to ~ 33 mW) ( 8 dBi to ~ 66 mW) (12 dBi to ~ 160 mW) (15 dBi to ~
320 mW) (18 dBi to ~ 640 mW)
|
** Information
plagiarised from this page may be found on 'copy-cat' Web Sites **
Use your Browser "Back
Button" to return to previous page