Video System: PAL Colour fully compatible with Australian TV System.

Image Device: 752 (H) x 582 (V) 437 664 Pixel LOW BLEMISH CCTV CCD Sensor 1/3" Sony - Due to the highly sensitive nature of this image sensor it may have more blemishes than ordinary sensors, these imperfections may continue to appear after manufacture until the photodiodes stabilise as the sensor ages, additional information here.
for: Super HAD MicroLens information @ "SONY"

Lens: Variable Focal Length 4 mm ~ 9 mm with external adjusters * Automatic Iris to cope with High levels of illumination with negligible smear, passes more light and provides greater depth-of-field than ordinary fixed Iris Lenses, external Iris control & Video Output for Setup Monitor * Corrected for major Visible-Infrared focus shift, there may be a slight shift that requires a compromise or choice between crisp colour or crisp monochrome * Under some lighting conditions internal reflections between Lens & Front Glass may appear in image, these are usually insignificant * There are no Accessory Lenses for this Camera, additional CCTV Lens information.

Scanning System: 2 : 1 Interlace, PAL 50 Hz vertical, 15 625 Hz horizontal.

Synchronisation: Internal.

Video Output: 1.14 V p-p Composite Video 75 ohms, suit Australian TV, VCR, AV & Video inputs, BNC socket, Cable ~ 40 cm exits through Bracket for concealment and protection against tampering. EXTRA Video Output for Setup Monitor behind threaded Back Access Cap, RCA socket.

Horizontal Pixels: 700 + (this value is provided for comparative purposes only) Better than VHS & Super-VHS near DTV / DVD (720 pixel) resolution.

Minimum Illumination: ~ 5 lux (this value is provided for comparative purposes only), 0 lux with LEDs 'ON'. Depending on Lens 'focal length' setting the Infrared LEDs illuminate up to ~ 90% of the Width-of-Vision and are effective up to ~ 25 metres depending on the Infrared reflective characteristics of subject, objects closer than ~ 3 metres may be overexposed when illuminated by LEDs.

Light Emitting Diodes: 48 pieces ~ 850 nm wavelength Infrared, these produce a dull Red visible glow. Automatic Light Sensor switches LEDs On/Off (~15/30 lux) depending on light level.

Movable Infrared Cut Optical Filter: Colour sub-carrier is turned off (Colour-Killer) to improve Signal to Noise Ratio when IR-CUT filter is out of optical path (LEDs On).

In Day mode (well lit, colour) mechanism automatically positions IR-CUT optical filter between Lens and Image Sensor to exclude Infrared radiation that would otherwise adversely affect colour reproduction, this ensures colour rendition not possible with ordinary non-filtered or notch-filter type Day/Night cameras.

In Night mode (low light, monochrome) Colour-Killer is activated and mechanism automatically removes IR-CUT optical filter to allow Infrared radiation to pass boosting low light and Infrared sensitivity, the result is significantly better night images using inbuilt Infrared Illuminator or with Infrared rich light sources. Infrared Response without Infrared filter is ~ 700 to ~ 1100 nm better than a 'CCTV notch IR Filter' filter, additional CCTV Infrared Night Vision information.

Automatic Electronic Shutter (AES): 20 milliseconds, low shutter speed eliminates smear associated with High Shutter Speeds necessary to control exposure with fixed iris lenses, additional CCTV Automatic Electronic Shutter information.

Spectral Response: ~ 400 to ~ 1100 nm with Infrared 'CUT' Filter 'out' of optical path, additional CCTV Infrared Night Vision information.

Signal to Noise ratio (SNR): 50 + dB, measured with AGC off.

Automatic Gain Control (AGC): Switchable On/Off, behind threaded Back Access Cap, default and recommended setting is ON.

Back Light Compensation (BLC): No, the switch on the Back of this Camera is disabled with Automatic Iris Lens version, (switch is used with fixed Iris Lens version not stocked).

Gamma: 0.45.

Automatic White Balance (AWB): 2100ºK ~ 9100º, Colour sub-carrier is turned off to improve Signal to Noise Ratio when IR-CUT filter is out of optical path (Night Colour-Killer mode, low light, monochrome).

Power Requirements: 12 Volts DC Regulated, ~ 1000 mA Peak (LEDs = On & Filter Moving), ~ 900 milliamps with LEDs On, ~ 190 milliamps with LEDs Off, 2.1 x 5.5 mm DC socket, center pin = (+), Cable ~ 40 cm exits through Bracket for concealment and protection against tampering. Consider cable resistance when installing, ask us about solutions if voltage drop is a problem with pre-existing wiring.

Made in Korea.

Dimensions: Camera: ~ 88 mm Diameter, ~ 120 mm Long. INTEGRAL Bracket: ~ 65 mm base diameter, ~ 105 mm high, ~ 35 mm pivot shaft. Camera & Bracket ~ 1100 grams. Visor: ~ 165 mm x ~ 106 mm, ~ 220 grams.

Need Sound ? Tiny Microphone & Pre-Amplifier

Ancillary Products

Use your Browser "Back Button" to return to previous page

Extra High 700 + H-Pixel RESOLUTION Colour Day/Night SEE-in-the-DARK Infrared Sensitive Video Camera with Motorised movable IR Cut Filter - ⅓" LOW BLEMISH SONY CCD Image Sensor - Infrared LED Illuminator- Automatic Iris Lens - Variable Focal Length Lens - Infrared Night Vision Video Camera with Swivel / Tilt Mounting Bracket - Suitable for Extra High Resolution images and zero illumination levels in Homes, Shops, Showrooms, Offices, Warehouses, sheltered outdoor use under eaves - This Camera is ideal for many Surveillance applications and for 'disturbance-free' observation (in total darkness) of Babies, Convalescing, Birds, Animals, etc., while Sleeping, Recuperating, Nesting, Calving, etc - Taiwan Quality etc. Use our PC Digital Video Recording Systems for High Resolution image capture with Motion Detection, Masking, Dial-Up, Paging, LAN & other facilities.